Matek F405-STD 32k Gyro

  • €26,99


This is the latest version of the F405-STD 32k Gyro

 

** These are an official Matek item not cheap clones that the majority of other shops sell eg banggood**

f405-std-1-1500x600.jpg

Key Features

  • F405 MCU with ICM20602 32Khz gyro
  • F405 supports PID loops at 16Khz
  • 5x UART ports accessible 
  • Betaflight OSD
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 6x PWM / DShot outputs without conflict
  • 2x 2812 LED outputs for loads of RGB bling
  • 5x UARTs are accessable
  • 1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x pair I2C1 pads for use with a magnetometer (iNav)
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
  • 36x36mm PCB with 30.5mm mounting holes

f405-std-layout.jpg

f405-std-6.jpg

f405-std-5.jpg

Hardware Specifications

  • MCU: 168MHz STM32F405RGT6

  • IMU: 32K ICM20602 gyro/accelerometer (SPI)

  • Baro: BMP280 (I2C)

  • OSD: BetaFlight OSD w/ AT7456E chip

  • Blackbox: MicroSD card slot (SD/SDHC)

  • VCP, UART1, UART2, UART3, UART4, UART5

  • Built in inverter for SBUS input (UART2-RX)

  • PPM/UART Shared: UART2-RX

  • SoftSerial on TX2, S5 or S6 optional

  • Camera control on S6 or DAC optional

  • Smartaudio & Tramp VTX protocol supported

  • Battery Voltage Sensor: 1:10

  • Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)

  • BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)

  • LDO 3.3V: Max.300mA

  • I2C1 SDA & SCL: Yes

  • WS2812 Led Strip : Yes

  • Beeper : Yes

  • RSSI: Yes

f405-std-10.jpg

Connecting your Receiver to the F405-STD

f405-std-rx.jpg

 

Connecting with BetaFlight

f405-std-bf.jpg

F405-STD Wiring diagram for iNav aircraft

f405-std-inav1.jpg