HAPPYMODEL MOBULA 6 FRSKY 1S BRUSHLESS FPV WHOOP DRONE

  • €89,99


HappyModel Mobula6 1S Brushless Edition BNF - FrSky

 

EU BASED NO IMPORT DUTIES !!

Available on pre-orderd .

Need extra 450mah batteries? Click here!!

Need extra 520mah batteries? Click here!!

Need spare frame? Click here!!

Need spare motors? Click here!!

Need spare camera? Click here!!

This little drone is only 20g and is taking the Whoop class drone to another level. Available in either normal (19000KV motor) or race edition (25000kv motor) to suit all needs. Equipped with F4 flight controller and Runcam Nano3 FPV camera it flies perfect and you can even do freestyle INDOORS! The 19000kv is more suited to indoors and freestyle. At this price you cannot go wrong.

Features:

  • AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX
  • Extreme light 1S 65mm Brushless whoop only 20g
  • Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
  • Smooth and powerful
  • Compatible for 1S Lipo/LIHV
  • Camera Angle adjustable
  • Receiver: internal SPI Frsky version (Compatible with ACCST D8/D16, we recommend using D8 mode)
  • Motor: SE0802 KV19000 / 25000KV

Specifications:

  • Wheelbase: 65mm
  • Size: 80mm*80mm*37mm
  • Weight: 20g

Flight controller:

  • CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR
  • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1S battery input (DC 2.9V-4.35V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Betaflight OSD(SPI Control)
  • Built-in 5.8G VTX
  • Built-in SPI Frsky receiver
  • Built-in 5V 1A BEC
  • Built-in voltage detection

Onboard 4in1 ESC:

  • MCU upgraded to EFM8BB21
  • Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: O_H_5_REV16_7.HEX
  • Default protocol: DSHOT600

Onboard Frsky SPI D8 receiver Version:

  • SPI BUS receiver Frsky D8 compatible
  • Compatible Non EU transmitter D8 modelChannels: 8ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m

Onboard 5.8g VTX:

  • Output power: 25mw
  • Frequency: 40CH
  • Input voltage: 3.3V 5.5V
  • Current consumption: 300mA(type)
  • Frequency: 5.8GHz 5bands 40 channels
  • With Race band
  • Smartaudio ready

Runcam Nano3:

  • Model: RunCam Nano 3
  • Image Sensor: 1/3″ CMOS
  • Horizontal Resolution: 800TVL
  • Lens : 2.1mm(M8) FOV 160°
  • Signal System: NTSC
  • S/N Ratio: >50dBElectronic Shutter Speed: Auto
  • Auto Gain Control (AGC): Auto
  • Min. Illumination: 0.01Lux@1.2F
  • D-WDR: Auto
  • Day/Night: Color
  • Power:DC 3-5.5V
  • Current: 110mA@5V 120mA@3.3V
  • Housing Material: ABS
  • Net Weight: 1.2g
  • Dimensions: L14mm*W14mm*H9mm

Motor:

  • SE0802 19000KV /25000KV
  • Configu-ration:9N12P
  • Stator Diamter:8mm
  • Stator Length:2mm
  • Shaft Diameter:Φ1mm
  • Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
  • Weight(g):1.9g
  • No.of Cells(Lipo):1S only

Propellers:

  • Gemfan 1219-3
  • Center Thickness:5mm
  • Prop Disk Diameter:31mm
  • Center Hole Inner diameter:1.0mm
  • Weight:0.28g

Lipo Battery:

  • Capacity:300mAh
  • Voltage:3.8v
  • Continuous Discharge Rate: 30C
  • Size: 57mmx12mmx7mm
  • Weight: 8g
  • Connector: PH2.0

Package:

  • 1x Mobula6 1S 65mm whoop Drone Frame
  • 1x Extra Gemfan 1219-3 Propellers (2cw+2ccw)    
  • 4x 1S 300mah 30C LiHV Battery
  • 1x 1S Lipo/LIHV USB Charger
  • 1x Propeller disassemble tool