FULLSPEED LEADER 3SE WITH UPGRADED EMAX MOTORS Ready To Fly Package

  • €299,98
  • Save €20


FULLSPEED LEADER 3SE WITH UPGRADED EMAX MOTORS Ready To Fly Package

WE UPGRADE THE MOTORS. NO ONE ELSE OFFERS THIS SERVICE.

EU BASED....NO IMPORT DUTIES !!!

Have a closer look here........

The drone is full spec with a very strong and light frame, F4 flight controller, Caddx Micro F2 camera, 28 amp 4 in 1 ESC, 25 / 100 / 200/ 400/ 600 switchable VTX but it falls short with the quality of the motors. This is why we install our own Emax 4500kv motors. Of course the price goes up but not that much and is well worth it. They last longer...more power....smoother flight. 

The Leader 3/3SE's power system supports 2-4S Lipo battery. We recommend run it on 3S 550/650mAh or 4s 450/550mAh Lipo battery to get the best combo of weight and speed. We have both in stock

Specification:

Brand Name: FullSpeed
Item Name: Leader 3/3SE  FPV RACING DRONE
Weelbase:  130mm
Net Weight: Leader 3(87g)、Leader 3SE(93g)
Thickness of bottom plate: 3mm
Thickness of side plate: 2mm
Flight controller: FSD F411   built-in OSD
ESC: FSD 28A  BLHELI_S  2-4S 4in1 ESC Dshot600
Motor: Emax RSII1106II 
Propeller: HQ3x3x3
Camera: Caddx Micro F2
VTX: FSD TX600 25/100/200/400/600 switchable VTX


FullSpeed FSD F411 Flight controller
Size:
 27.5mm * 27.5mm * 5mm
Mounting hole: 20mm * 20mm
MCU: STM32 F411
Built-in Betaflight OSD
Firmware: FULLSPEEDF411
 Betaflight 
BEC: 5V 3A

FullSpeed FSD 28A BLHELI_S 4in1 ESC 
Size:
 27mm * 27mm * 5mm
Mounting hole: 20mm * 20mm
Firmware: BLHELI_S 
Input voltage: 2-4S
Continuous current: 28A 
BEC Ouput: NO


FullSpeed FSD TX600 25mW-600mW VTX FPV Transmitter
Output power:
 PIT/25mW/100mW/200mW/400mW/600mW switchable
Control mode:BFOSD control(RX)/button
Video system: NTSC/PAL
Antenna: IPEX
BAT: 5V Recommended
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ   
(TX600's factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations 
if you need to unlock the frequency.)

Size: 26*26mm(L*W),Hole:20*20mm
Weight: 2.3g

COMBO:
1 x Leader 3/3SE  frame kit
1 x FSD428 F411 28A Flight tower
4 x Emax RSII1106/RS1108 4500KV brushless motor
2 x  HQ 3x3x3propeller (CW)
2 x  HQ 3x3x3propeller (CCW)
1 x Caddx Micro F2
1 x FSD TX600 25mW-600mW VTX FPV Transmitter

Need extra props? Click here!!

Need 3s battery? Click here!!

Need 4s batttery? Click here!!

    The Radio 

    The Jumper T16 Open Source Multi-protocol Radio Transmitter JumperTX. A fully featured radio controller with the ability to run multiple protocols. Now you can have one radio to control all of your models!

     

    Vision and goal:
    To create the most affordable, high-performance open source remote control on the market today. The T16 truly is the ONE radio to rule them all. With angle adjustable ultra-smooth dual bearing precision gimbals, large 4.3” display, more than ample input controls, integrated 6 position buttons for professional flight control systems, JR module bay supporting TBS Crossfire modules and many more features the T16 is a remarkable offering at this price point.
     
    Power to the people:
    Never wanting to stand still, the team at Jumper looked for a way to put the maxim amount of radio in the user's hands for the minimum amount of cost. With advancements in technology and materials cost there really is no reason for a high end radio to have a high end price tag and Jumper have not only proven this point but they have smashed expectations, the T16 changes everything!

    Ergonomics and functionality:
    The T16 has undergone extensive testing for comfort and functionality, we have taken all the feedback from our previous products along with the feedback from the community in what they expected from a radio and rolled it all into the T16.

     

    The Goggles

    These are the latest Commander V1S Goggles with DVR capabilities from Aomway. Finished in gloss black with improved optics and 64 channels among other things. 

    Commander V1S goggles is well‐equipped with a pair of 16 to 9 WVGA LCD micro displays (FOV as 32 degrees) for providing immersive FPV experience. Inside the goggles, it integrates dual high sensitivity diversity RF modules for optimal analog video signal reception, meanwhile the high definition multimedia interface port is available to support 720p HD input for use with a digital video downlink. Commander V1S allows auto switch PAL/NTSC and built‐in DVR seated on top for easy recording video file. OSD menu already includes mode, brightness/contrast, channel/band, voltage and DVR status all that you need. 

    A high‐speed ventilating fan installed to prevent fogging up on screens and a mask with soft foam attached on all these humanized designs are intended for ultimate wearing comfort.     

    SPECIFICATIONS: Optical:  FOV: 32° 

    Lens: Glass optics (binocular)

    Display:  854x480(WVGA)LCD display, LED backlight

    3D function:  Side/Side 3D (include AV 3D and HD 3D mode)

    Interpupillary Distance (IPD): 59‐69mm (Adjustable)

    Audio Output:  Stereo

    Operation:  Brightness / contrast / channel selection / display mode /DVR recording / head tracker switch/ mini fan switch

    Video Format:     NTSC / PAL auto switch

    HD Input:  Support 720p, C‐type high definition multimedia interface

    DVR Recording:  Only for RF and AV in mode  TF card support to 32GB  Video compression format: MJPG 30fps  Recording file resolution: D1 NTSC 720*480/ PAL 720*576

    Built‐in Receiver:  Dual 64CH high‐sensitivity diversity RF module, auto switch, channel display on screen

    Auto Scan:  One key starts auto search active channel within 6CH at high speed

    Power Supply:  DC 7‐18V (2S‐4S) 

    OSD display voltage status (low voltage alarm)

    Interface:  DC in: standard 5.5*2.1 (inner positive outer negative)

    AV in: 3.5mm four‐pole

    AV jack port  Audio: 3.5mm three‐pole earphone jack port 

    TF card slot for recording

    Operating Environment:  0 ‐ 55°C 

    Weight: 172g

    Package Size:230*165*77mm

    INCLUDES 

    • 1x Aomway Commander V1S 5.8G 64CH 2D 3D FPV Goggles
    • 1x Patch Antenna
    • 1x Cloverleaf Antenna
    • 1x AV Cable
    • 1x Filter Rectifier
    • 1x Elastic Band
    • 1x Shading Sponge
    • 1x User Manual