FullSpeed Leader 3/3SE WITH UPGRADED EMAX MOTORS

  • €114,99


The FullSpeed Leader 3 is possibly the best racing drone in its class you can buy. 

We then upgrade the motors. No one else offers this service.

Choose either Emax RS1106II or RS1108 for more power. 

EU BASED....NO IMPORT DUTIES !!!

Note: The SE version has the canopy. 

Have a closer look here........

The drone is full spec with a very strong and light frame, F4 flight controller, Caddx Micro F2 camera, 28 amp 4 in 1 ESC, 25 / 100 / 200/ 400/ 600 switchable VTX but it falls short with the quality of the motors. This is why we install our own Emax 4500kv motors. Of course the price goes up but not that much and is well worth it. They last longer...more power....smoother flight. 

So now it is the best 3 inch quad you can buy.

The Leader 3/3SE's power system supports 2-4S Lipo battery. We recommend run it on 3S 550/650mAh or 4s 450/550mAh Lipo battery to get the best combo of weight and speed. We have both in stock

Specification:

Brand Name: FullSpeed
Item Name: Leader 3/3SE  FPV RACING DRONE
Weelbase:  130mm
Net Weight: Leader 3(87g)、Leader 3SE(93g)
Thickness of bottom plate: 3mm
Thickness of side plate: 2mm
Flight controller: FSD F411   built-in OSD
ESC: FSD 28A  BLHELI_S  2-4S 4in1 ESC Dshot600
Motor: Emax RSII1106II or RS1108 4500KV
Propeller: HQ3x3x3
Camera: Caddx Micro F2
VTX: FSD TX600 25/100/200/400/600 switchable VTX


FullSpeed FSD F411 Flight controller
Size:
 27.5mm * 27.5mm * 5mm
Mounting hole: 20mm * 20mm
MCU: STM32 F411
Built-in Betaflight OSD
Firmware: FULLSPEEDF411
 Betaflight 
BEC: 5V 3A

FullSpeed FSD 28A BLHELI_S 4in1 ESC 
Size:
 27mm * 27mm * 5mm
Mounting hole: 20mm * 20mm
Firmware: BLHELI_S 
Input voltage: 2-4S
Continuous current: 28A 
BEC Ouput: NO


FullSpeed FSD TX600 25mW-600mW VTX FPV Transmitter
Output power:
 PIT/25mW/100mW/200mW/400mW/600mW switchable
Control mode:BFOSD control(RX)/button
Video system: NTSC/PAL
Antenna: IPEX
BAT: 5V Recommended
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ   
(TX600's factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations 
if you need to unlock the frequency.)

Size: 26*26mm(L*W),Hole:20*20mm
Weight: 2.3g

COMBO:
1 x Leader 3/3SE  frame kit
1 x FSD428 F411 28A Flight tower
4 x Emax RSII1106/RS1108 4500KV brushless motor
2 x  HQ 3x3x3propeller (CW)
2 x  HQ 3x3x3propeller (CCW)
1 x Caddx Micro F2
1 x FSD TX600 25mW-600mW VTX FPV Transmitter

Need extra props? Click here!!

Need 3s battery? Click here!!

Need 4s batttery? Click here!!