Happymodel Mobula7 HD 2-3S 75mm F4 Frsky Version

  • €145,99
  • Save €17


Happymodel Mobula7 HD 2-3S 75mm cinewhoop.

EU BASED NO IMPORT DUTIES !!

Happymodel have done it again! After the very successful Mobula7 they have now brought out an all new HD version with on board Caddx Turtle V2 HD camera.That's right. You can now record your flights in full glorious HD! It even records in 1080p 60fps to make your fast flights real smooooth! More powerful motors are of course also included. Now you can upload your HD footage to Youtube and show your skills!

Need extra props? Click here!!

Need a spare canopy? Click here!!

Need a spare frame? Click here!!

Need a spare motor? Click here!!

Need a battery? Click here!!

Key Features

  • New Crazybee F4 PRO V2.0 AIO Flight controller 1-3s Lipo Compatible
  • 2S for indoor Cine whoop mode
  • 3S for outdoor Freestyle whoop mode
  • Betaflight support , multi flight mode: ACRO/AIR/ANGLE
  • The lightest 1102 brushless motor only 2.7g with double ball bearings
  • Powerful and smoothly
  • Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)
  • Caddx turtle v2 + 1080p 60fps DVR ready
  • Camera Angle adjustable
  • VTX power switchable 25mw~200mw
  • Smartaudio ready , change VTX bands, powers, channels via OSD
  • Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
  • Full telemetry function ready
  • Special Breath light ready
  • Real Bind and Fly version
  • Compatible both for 2s-3s Lipo/LIHV

Part Specification

Motor Mode: EX1102 KV10000

Configu-ration:9N12P
Stator Diamter:11mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ13.5mm*16mm
Weight(g):2.8g
No.of Cells(Lipo):1S-3S

Flight controller (Frsky version) CRAZYBEE F4FR PRO V2.0 Firmware target: CrazybeeF4FR

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)

Sensor: MPU-6000(SPI connection)

Board size: 28.5 * 28.5MM
Power supply: 1-3S battery input (DC 3.5-13V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)

 

Built-in Betaflight OSD(SPI Control)

Built-in Current meter Max 28A

Current meter scale set to 1175

Built-in 5V 1A Buck / Boost with LC filter

Built-in voltage detection

Onboard 4in1 ESC MCU upgraded to EFM8BB21

Power supply: 1-3S LiPo/LiPo HV (3.5v/13v)
Current: 5A continuous peak 6A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7.Hex
Default protocol: DSHOT600

Frsky NON-EU receiver Version SPI BUS receiver

Frsky D8/D16 switchable

Compatible Non EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch

Failsafe support

No ground interference ( Transmitter and receiver 1 m from the ground): 300m

VTX Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With RacebandSmartaudio ready
Weight: 3g
CADDX Turtle V2 Image sensor: 1/2.7″ CMOS sensor

Horizontal: 800TVL

TV system: NTSC/PAL changeable

Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps

Power Input: DC 4.5-20V

FPV FOV: 155°

Recording FOV: 170°

Mini Illumination: 0.01lux

Image Resolution: 2 Megapixels

Lens: 1.8mm Turbo Eye Lens

Working Current: 380mA@5V/160mA@12V (low consumption)

OSD Menu: Yes (Support Voltage Display)

Video Files: MP4

Audio: Support

Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100

S/N Ratio: >60dB (AGC OFF)

Video Output: CVBS

Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)

Color: Red