iFlight TITAN XL5 GPS BNF 4s -6s

  • €335,00


iFlight TITAN XL5 with GPS is iFlights latest offering. iFlight has always produced the highest of quality frames, motors and electronics. This time they put all their knowledge and experience together and then added GPS! This is one drone ready to go that you will not to do anything with. It does it all.


EU BASED NO IMPORT DUTIES.........

Note:DJI version is also available on pre-order. Please contact us for delivery times.

PRODUCT DESCRIPTION

After the popular TITAN DC5 (DeadCat style frame) approach iFlight decided to take a step back to the roots and create a new X-Geometry frame to get the best performance on both axis and better weight distribution for freestyle. 

HIGHLIGHTS:

- 6mm arm design for more durability

- XING 2208 motors for more power

- GPS pre-installed for more safety at distance

- Variable GoPro TPU mount (supports ND-Filter inserts)

- 360° TPU protection and Antenna mounts


PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was appplied for a great flight experience!

- GPS-rescure mode is configured and just needs to be enabled in your Betaflight Configurator! (Please be aware of how it works before you use it!)

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

- Motor Power is configured to 70% throttle limit (scaled) by default to give more throttle stick resolution for an easy start on the 6S 1800kv version. Need more Power? Just enable 100% in the Betaflight Configurator to unleash the Beast!

 

FRAME // TITAN XL5:

- Weight :145g

- Wheelbase: 250mm

- Main body dimension: 185*133mm

- Bottom to top distance: 30mm

- Arm thickness: 6mm

- Bottom plate thickness: 2mm

- Top plate thickness: 2mm

- Camera plate thickness: 2mm (2.5mm included TPU inserts)

 

ELECTRONICS // SucceX-E F4 Stack (45A 4-in-1 ESC):


SucceX-E F4

- MCU:STM32F405

- IMU:MPU6000

- Betaflight OSD:YES

- Blackbox:8MB

- 4X Uarts(1 2 3 6 )

- 8 x Dshot/Proshot/Oneshot output

- 8 x individual ESC power/ signal pads

- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

- VTX protocol:YES(IRC Tramp)

- WS2812 led Strip:YES

- Baro:No

- Beeper:YES

- Input:2-6S(Max 8S)

- BEC:5V/2.5A continuos


SucceX-E 45A 4in1

- Dimension: 40*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight:14.4g

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

- Current sensor: YES

- BEC: NO

- Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

- Target: G-H-30 BLS 16.7