iFlight TITAN XL5 HD 250mm F7 50A ESC 4S FPV Racing Drone BNF with DJI Air Unit & GPS

  • €499,00

iFlight TITAN XL5 HD 250mm F7 50A ESC 4S FPV Racing Drone BNF with DJI Air Unit & GPS
iFlight TITAN XL5 with GPS is iFlights latest offering. iFlight has always produced the highest of quality frames, motors and electronics. This time they put all their knowledge and experience together and then added GPS! This is one drone ready to go that you will not to do anything with. It does it all.


Available on pre order. Please contact us for shipping times. 

Notice: The Camera Mount for Gopro is NOT Included in the package

Brand Name: iFlight
Item Name: 250mm F7 4S FPV Racing Drone BNF 
Wheelbase: 250mm
Optional Receiver: BNF-DJI ( Built-in DJI RX); 
                              Frsky R-XSR Receiver ( Built-in DJI RX & Frsky R-XSR RX)
Recommend Battery: 4S 1550mAh 120C Lipo Battery ( NOT Included)

TITAN XL5 250mm Frame 
Wheelbase: 250mm
Main body dimension: 185*133mm
Bottom to top distance: 30mm
Arm thickness: 6mm
Bottom plate thickness: 2mm
Top plate thickness: 2mm
Camera plate thickness: 2mm (2.5mm included TPU inserts)
Weight : 145g
SucceX-D F7 Stack
F7 V2.1 TwinG Flight Controller (HD Version)
MCU: 216MHz STM32F722
Gyroscope: 2x ICM20689
Baro: YES
Blackbox: 32MB
Betaflight OSD: YES
BEC: 5V 2.5A / 9V 2.5A
Current sensor scale:  100
Inverter for SBUS input (UART2-RX)
Smartaudio & Tramp VTX protocol supported
Beeper pad : Yes
RSSI input pad: No
UARTs: 5
Motor outputs: 8
BLHeli32 Telemetry: RX5
Firmware: IFLIGHT_F722_TWING
Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm
Dimensions: 36*36mm
Weight: 7.5g
USB type-C
SucceX-D F7 Stack
50A 2-6S  BLheli_32 4in1 ESC 
Dimension: 43*39mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Volts input: 2-6S
STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
Current sensor: Yes
Telemetry: Supported
Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
Target: iFlight-BL32-4IN1
XING 2208 2450KV 4S Motor
Brand name: iFlight
Item name: XING X2208 Brushless Motor
KV: 2450KV
Stator Diamter: 22mm
Stator Length: 8mm
Shaft Diameter: 5mm
No.of Cells(Lipo): 3-4S
Weight: 37g
 Nazgul 5140 3-Blade Propeller
Brand Name: iFlight
Item Name: 5140 5 Inch Durable 3-Blades Propeller
Model: Nazgul 5140
Material: polycarbonate
Mounting: 5mm center hole
Weight of Single Prop: 4g
Quantity: 2 CW & 2 CCW


- 6mm arm design for more durability
- XING 2208 motors for more power
- GPS pre-installed for more safety at distance
- Variable GoPro TPU mount (supports ND-Filter inserts)
- 360° TPU protection and Antenna mounts

Package Included:
- 1x TITAN XL5 HD Frame
- 1x DJI FPV Camera
- 1x DJI FPV Air Unit Module
- 2x DJI FPV Air Unit Antenna SMA
- 1x TPU Bracket for DJI Air Unit Module
- 1x TPU Antenna holder for DJI antenna
- 2x TPU camera side plate soft mount
- 1x TPU lens cover
- 1x iFlight Lipo Strap 
- 2x Nazgul 5140 Propeller (Set of 4 - Color May Vary)
- 4x XING 2208 2450KV Motor Unibell
- 1x SucceX-D F7 Flight Controller
- 1x SucceX BLHeli_32 50A 4in1 ESC
- 2x MMCX to RP-SMA Female Adapter Cable
- 1x GPS Module
- 1x Optional Receiver